Operation Manual

 Enter the address and port on which your Acronis Access management server will be

reachable (i.e. 10.27.81.3 and 10.27.81.4).

 Select your certificate. This should be the same SSL certificate that is tied to the DNS

address of the load balancer.

 Press Apply.

Note: If you don't have a certificate, a self-signed certificate will be created by Acronis Access. This

certificate should NOT be used in production environments.

c. On the Gateway Server tab:

 Enter the address and port on which your Gateway Server will be reachable (i.e.

10.27.81.10 and 10.27.81.11).

 Select your certificate. This should be the same SSL certificate that is tied to the DNS

address of the load balancer.

 Press Apply.

Note: If you don't have a certificate, a self-signed certificate will be created by Acronis Access. This

certificate should NOT be used in production environments.

4. Navigate to the Acronis Access installation directory (e.g. C:\Program Files

(x86)\Acronis\Access\Access Server\ ) and edit acronisaccess.cfg with a text editor.