Operation Manual

Note: Please confirm the settings match your existing mobilEcho Client Management Server settings.

This web console typically runs on all available network addresses on port 3000. If you have an existing

SSL server identity certificate, it will be automatically selected. If you do not, a self-signed certificate

will be generated.

14. Acronis Access Server requires that a File Repository location be selected. If you are using

mobilEcho only, this File Repository will not be used to store anything, but setting a location is

still required.

This repository is used by Acronis’ activEcho file sync and share features. These features will not be

enabled if you are upgrading a server that does not already have them installed, but you can chose to

enable them at a later time, if desired.

The default location for the File Repository is:

C:\ProgramData\Acronis\Access\FileStore

If you would like to try out activEcho in the future, you may want to select a location on a data drive

instead of the C: drive. This location can be modified post-install, too.

15. Click OK to exit the Configuration Utility and apply these settings.

16. You will now log into the Acronis Access Server web console for the first time to complete your

configuration. You will be prompted to click OK to launch a web browser and complete this