Operation Manual

ManualsBrandsAcronis ManualsSoftwareBackup Advanced Version 11.5 Update 6

161

162

163

164

165

166

167

168

169

170

Restart the machine automatically after recovery is finished

This option is effective when operating under bootable media.

The preset is Disabled.

This option enables booting the machine into the recovered operating system without user

interaction.

Change SID after recovery

This option is not effective when recovery to a virtual machine is performed by Acronis Backup Agent

for VMware or Acronis Backup Agent for Hyper-V.

The preset is Disabled.

Acronis Backup can generate an unique security identifier (SID) for the recovered system. You do not

need a new SID when recovering a system over itself or when creating a system replica that will

replace the original system. Generate a new SID if the original and the recovered systems will work

concurrently in the same workgroup or domain.

5.7.2 E-mail notifications

This option is effective for Windows and Linux operating systems.

This option is not available when operating under the bootable media.

The option enables you to receive e-mail notifications about the recovery task's successful

completion, failure or when user interaction is required.

The preset is: Disabled.

To configure e-mail notification

1. Select the Send e-mail notifications check box to activate notifications.

2. Under Send e-mail notifications, select the appropriate check boxes as follows:

 When recovery completes successfully.

 When recovery fails.

 When user interaction is required.

3. In the E-mail addresses field, type the destination e-mail address. You can enter several

addresses separated by semicolons.

4. In the Subject field, type the notification subject.

The subject can include ordinary text and one or more variables. In the received e-mail messages,

each variable will be replaced by its value at the time of task execution. The following variables

are supported:

 %description%

For a machine running Windows, the %description% variable will be replaced by the text that

is given in the Computer description field of the machine. To specify this text, either go to

Control panel > System or run the following command as an administrator:

net config server /srvcomment:<text>

For a machine running Linux, the %description% variable will be replaced by an empty string

("").

 %subject%