User manual

ManualsBrandsAcronis ManualsApplicationsBackup for Windows Server 11.7

100

Table Of Contents

4.7.18.1 Pre-data capture command

To specify a command/batch file to be executed before data capture

1. In the Command field, type a command or browse to a batch file. The program does not support

interactive commands, i.e. commands that require user input (for example, "pause".)

2. In the Working directory field, specify a path to a directory where the command/batch file will

be executed.

3. In the Arguments field specify the command’s execution arguments, if required.

4. Depending on the result you want to obtain, select the appropriate options as described in the

table below.

5. Click Test command to check if the command is correct.

Check box

Selection

Fail the backup task if the

command execution fails*

Selected

Cleared

Selected

Cleared

Do not perform the data

capture until the command

execution is complete

Selected

Cleared

Result

Preset

Perform the data

capture only after the

command is

successfully executed.

Fail the task if the

command execution

fails.

Perform the data

capture after the

command is

executed despite

execution failure

or success.

N/A

Perform the data

capture concurrently

with the command

and irrespective of

the command

execution result.

* A command is considered failed if its exit code is not equal to zero.

4.7.18.2 Post-data capture command

To specify a command/batch file to be executed after data capture

1. In the Command field, type a command or browse to a batch file. The program does not support

interactive commands, i.e. commands that require user input (for example, "pause".)

2. In the Working directory field, specify a path to a directory where the command/batch file will

be executed.

3. In the Arguments field specify the command’s execution arguments, if required.

4. Depending on the result you want to obtain, select the appropriate options as described in the

table below.

5. Click Test command to check if the command is correct.

Check box

Selection

Fail the task if the command

execution fails*

Selected

Cleared

Selected

Cleared

Do not back up until the

command execution is

complete

Selected

Cleared