User`s guide

166 Copyright © Acronis, Inc., 2000-2010
To: 12/01/2010. Actually the task will end on the last workday of November. By setting up this
date we just define that the task must be discontinued in 2010, after autumn ends in the
northern hemisphere.
Several monthly schedules for one task
In the case when the task needs to be run on different days or weeks with different time intervals
depending on the month, consider adding a dedicated schedule to every desired month or several
months.
Suppose that the task goes into effect on 11/01/2009.
 During northern winter, the task runs once at 10PM on every workday.
 During northern spring and autumn, the task runs every 12 hours on all workdays.
 During northern summer, the task runs every first and fifteenth of every month at 10 PM.
Thus, the following three schedules are added to the task.
First schedule
1. Months: December, January, February.
2. On: <All> <All workdays>
3. Once at: 10:00:00 PM.
4. Effective:
From: 11/01/2009.
To: not set.
Second schedule
1. Months: March, April, May, September, October, November.
2. On: <All> <All workdays>.
3. Every: 12 hours
From: 12:00:00 AM Until: 12:00:00 PM.
4. Effective:
From: 11/01/2009.
To: not set.
Third schedule
1. Months: June, July, August.
2. Days: 1, 15.
3. Once at: 10:00:00 PM.
4. Effective:
From: 11/01/2009.
To: not set.
5.4 Advanced scheduling settings
The following advanced settings are available when setting up a daily, weekly, or monthly schedule in
a backup policy.