User`s guide

Kernel parameters

This window lets you specify one or more parameters of the Linux kernel. They will be automatically

applied when the bootable media starts.

These parameters are typically used when experiencing problems while working with the bootable

media. Normally, you can leave this field empty.

You also can specify any of these parameters by pressing F11 while in the boot menu.

Parameters

When specifying multiple parameters, separate them with spaces.

acpi=off

Disables Advanced Configuration and Power Interface (ACPI). You may want to use this

parameter when experiencing problems with a particular hardware configuration.

noapic

Disables Advanced Programmable Interrupt Controller (APIC). You may want to use this

parameter when experiencing problems with a particular hardware configuration.

vga=ask

Prompts for the video mode to be used by the bootable media's graphical user interface.

Without the vga parameter, the video mode is detected automatically.

vga=mode_number

Specifies the video mode to be used by the bootable media's graphical user interface. The mode

number is given by mode_number in the hexadecimal format—for example: vga=0x318

Screen resolution and the number of colors corresponding to a mode number may be different

on different machines. We recommend using the vga=ask parameter first to choose a value for

mode_number.

quiet

Disables displaying of startup messages when the Linux kernel is loading, and starts the

management console after the kernel is loaded.

This parameter is implicitly specified when creating the bootable media, but you can remove this

parameter while in the boot menu.

Without this parameter, all startup messages will be displayed, followed by a command prompt.

To start the management console from the command prompt, run the command: /bin/product

nousb

Disables loading of the USB (Universal Serial Bus) subsystem.

nousb2

Disables USB 2.0 support. USB 1.1 devices still work with this parameter. This parameter allows

you to use some USB drives in the USB 1.1 mode if they do not work in the USB 2.0 mode.

nodma

Disables direct memory access (DMA) for all IDE hard disk drives. Prevents the kernel from

freezing on some hardware.