Installation Guide

2.3. Planning Network
the network interface must be connected to the internal network. This role must be assigned to one
network interface on each node running the S3 storage access point service.
•
ABGW private. The network interface will be used by the Acronis Backup gateway storage access
point. To perform this role, the network interface must be connected to the internal network. This
role must be assigned to one network interface on each node running the Acronis Backup gateway
storage access point service.
• Public. If one or more public roles (and no internal roles) are assigned to a network interface, only traffic
on ports required by the public role(s) is allowed to and from said interface.
•
iSCSI. The network interface will be used by the iSCSI storage access point to provide access to user
data. To perform this role, the network interface must be connected to the public network accessible
by iSCSI clients.
•
S3 public. The network interface will be used by the S3 storage access point to provide access to
user data. To perform this role, the network interface must be connected to the public network
accessible by S3 clients.
•
ABGW public. The network interface will be used by the Acronis Backup gateway storage access
point to provide access to user data. To perform this role, the network interface must be connected
to the public network accessible by Acronis Backup Cloud agents.
•
Web CP. The network interface will be used to transfer web-based user interface data. To perform
this role, the network interface must be connected to the public network.
•
SSH. The network interface will be used to manage the node via SSH. To perform this role, the net-
work interface must be connected to the public network.
• Custom. These roles allow you to open specific ports on public network interfaces.
2.3.5 Sample Network Configuration
The figure below shows an overview of a sample Acronis Storage network.
23