Installation Guide
Table Of Contents
- Introduction
- Planning Acronis Storage Infrastructure
- Understanding Acronis Storage Architecture
- Planning Node Hardware Configurations
- Planning Network
- Understanding Data Redundancy
- Understanding Failure Domains
- Understanding Storage Tiers
- Installing Acronis Storage
Chapter 3. Installing Acronis Storage
4. In the Editing bond slave... window, select a network interface to bond from the Device drop-down list.
5. Configure other parameters if required.
6. Click Save.
7. Repeat steps 3 to 7 for each network interface you need to add to the bonded connection.
8. Configure other parameters if required.
34