Operation Manual

Here you can specify the backup and validation schedule settings.

You can choose and set up one of the following backup or validation frequencies:

 Daily (p. 158) - the operation will be executed once a day or more frequently.

 Weekly (p. 158) - the operation will be executed once a week or several times a week on the

selected days.

 Monthly (p. 159) - the operation will be executed once a month or several times a month on the

selected dates.

 Upon event (p. 159) - the operation will be executed upon an event.

Clicking the Do not schedule button turns off the scheduler for the current operation. In this case the

backup or validation will run only when you click Back up now or Validate backup respectively in the

main window.

Advanced settings

Clicking Advanced settings allows you to specify the following additional settings for backup and

validation:

 To postpone a scheduled operation until the next time the computer is not in use (a screen saver

is displayed or computer is locked), select the Run the backup only when the computer is idle

check box. If you schedule validation, the check box will change to Run the validation only when

the computer is idle.

 If you want to wake up the sleeping/hibernating computer to perform the scheduled operation,

select the Wake up the sleeping/hibernating computer check box.

 If the computer is switched off when the scheduled time comes, the operation won't be

performed. You can force the missed operation to run at the next system startup. To do so,

select the Run at system startup check box.

Additionally, you can set a time delay to start backup after the system startup. For example, to

start backup 20 minutes after system startup, type 20 in the appropriate box.