Operation Manual

After you start the wizard by selecting the Tools and utilities tab and then clicking System Clean-up,

it will search for any traces of user actions stored by Windows. When the search is finished, its results

will be available at the top of the wizard window.

You can view the search results and manually select the items you wish to remove.

If you want to change the default system clean-up settings, click the corresponding link in the first

window of the System Clean-up wizard.

Click Clean-up to launch removing the found items.

8.8.3.1 Clean-up settings

In the clean-up settings window you can change the clean-up settings for every system component.

Some of these settings apply to all components.

To change the clean-up settings for a component:

 Expand the System Components item in the tree and select the component clean-up settings

which you need to change. You can enable or disable scanning of the component by the Clean-up

wizard. To do this, select or clear the Enable check box.

If required, you can also expand a component and customize the desired data destruction

method, files to clean, clean-up registry search strings you have used for finding computers in the

local network, etc. To do this, click the triangle near the component, select an option from the

list and specify the settings.

 After you set the desired components' properties, click OK to save your settings. These settings

will be used as default next time you launch the Clean-up wizard.

If you have already changed the clean-up settings before, you can always return to the program

defaults by clicking the Restore Defaults button.

System components:

 Recycle Bin

 Temporary files

 Hard disk free space