Operation Manual

7. On the Archive selection step, select the online backup and click Next.

8. On the Recovery method step, select Recover whole disks and partitions.

9. On the What to recover step, select the system partition (usually C) and the System Reserved

partition (if any). You can also recognize these partitions by the Pri, Act flags.

10. On the "Settings of partition C" (or the letter of the system partition, if it is different) step,

change the settings, if necessary. For example, you need to change settings when recovering to

the new hard disk of a different capacity.

11. Carefully read the summary of operations at the Finish step. If you have not resized the partition,

the sizes in the Deleting partition and Recovering partition items must match. Click Proceed.