Operation Manual

90 Copyright © Acronis, Inc., 2000-2007
/restore_security:[on |
off]
Specifies whether to restore files’ security attributes (default) or the
files will inherit the security settings of the folder where they will be
restored.
/original_date:[on | off]
Specifies whether to restore files’ original date and time from the
archive or assign the current date and time to the restored files. If
not specified, the current date is assigned.
list
/filename:[file_name]
With this option, the image contents is displayed.
When listing image contents, partition numbers may not coincide
with those in the drives/partitions list, if the image does not contain
all the disk partitions. For example, if the image contains partitions
2-3 and 2-5, they will be listed as 2-1 and 2-2.
If the
deploy /partition command cannot find a partition in the
image by its physical number, use
/
partition:<number in the
image> /target
_
partition:<physical number of the target
partition>
keys. For the above example, to restore partition 2-5
to its original place use:
/partition:2-2 /target partition:2-5.
explore
/partition:[partition
number]
Specifies a list of partitions to be mounted as virtual drives. Without
this option, all partitions stored in the image will be mounted.
To obtain the partition number for this option, list the image
contents with the
/list/filename command and use the number
from the Idx column.
/letter
Assigns letters to the mounted drives. This option is used with
/partition option only.
unplug
/letter:X
Specifies the virtual disk to be disconnected by letter.
/letter:all
Disconnects all virtual drives.
asz_create
/harddisk:X
Specifies the hard disk number where the Acronis Secure Zone will
be created.
/partition:[partition
number]
Specifies partitions from which free space will be taken for Acronis
Secure Zone.
/size:[ASZ size in
sectors]
Sets the Acronis Secure Zone size (in sectors). If not specified, is
set as an average between the maximal (using unallocated space
and free space on all the listed partitions) and minimal values.
/asz_activate
Activates the Acronis Startup Recovery Manager. The option will not
take effect if the system partition is resized during Acronis Secure
Zone creation. In that case, use the separate
/asz_activate
command.
asz_activate
/password:[password]
Sets a password for the Acronis Secure Zone.