Operation Manual

8.3.2 Acronis Secure Zone location

If you are creating the Acronis Secure Zone, select a disk and its partition whose space will be used to

create Acronis Secure Zone. You can also select free or unallocated space of other partitions, if these

partitions are located on the selected disk. Note that the Acronis Secure Zone can be located on basic

disks only; you cannot create it on dynamic disks and volumes.

To specify a location for the Acronis Secure Zone:

 Click on a hard disk drive to create the Acronis Secure Zone on.

 On the selected hard disk drive, select one or more partitions from which unallocated and/or

free space will be taken. The chosen partitions will be resized if necessary to give space to the

Acronis Secure Zone.

 Having selected the disk and partitions, click Next to proceed to the Size of Acronis Secure Zone

(p. 175) step.

To increase/decrease the size of the Acronis Secure Zone:

 Select the partitions from which space will be used to increase the size of the Acronis Secure

Zone, or that will receive free space after the size of the Acronis Secure Zone is reduced. You can

also select partitions with unallocated space.

 Click Next to proceed to the Size of Acronis Secure Zone (p. 175) step.

8.3.3 Selecting partitions

Select the partitions from which space will be used to create Acronis Secure Zone. You can also select

an unallocated space to create the zone.

To select a partition:

 Select the appropriate partition check box and click Next.