7.0
Table Of Contents
- END-USER LICENSE AGREEMENT
- Introduction
- Installation and operation
- General program information
- Creating a partition (disk) image
- Restoring a disk (partition) from an image
- Browsing and restoring individual files
- Transferring the system to a new disk
- Adding a new hard disk
- Scheduled tasks
- Other operations
- Troubleshooting
- Partitions and file systems
- Hard disks and BIOS setup
Acronis True Image User’s Guide
Copyright © SWsoft, 2000–2003
69
Parameter Value Purpose
Type 1-47, Not
Installed,
Auto
Type 0 or Not Installed is used when there is no
hard disk installed (to uninstall it). Type 47 is
reserved for user-defined parameters or for
parameters detected by the IDE Auto detection
utility.
Auto value allows for automatic detection of IDE
disk parameters during the boot sequence.
Cylinder (Cyl) 1-65535 The number of cylinders on a hard disk. For IDE
disks, a logical number of cylinders is specified.
Heads (Hd) 1-16 The number of heads on a hard disk. For IDE
disks, a logical number of heads is specified.
Sectors (Sec) 1-63 The number of sectors per track of a hard disk. For
IDE disks, a logical number of sectors is specified.
Size (Capacity) MBytes The capacity of the disk in megabytes. It is
calculated according to the following formula:
Size=(Cyl x Hds x Sct x 512) / 1024 / 1024.
Mode
(Translation
Method)
Normal/
LBA/
Large/Auto
Method of translation of sector addresses.