7.0
Table Of Contents
- END-USER LICENSE AGREEMENT
- Introduction
- Installation and operation
- General program information
- Creating a partition (disk) image
- Restoring a disk (partition) from an image
- Browsing and restoring individual files
- Transferring the system to a new disk
- Adding a new hard disk
- Scheduled tasks
- Other operations
- Troubleshooting
- Partitions and file systems
- Hard disks and BIOS setup
Acronis True Image User’s Guide
Copyright © SWsoft, 2000–2003
76
Select an item of the list with the Up or Down keys and move the device up the list
or down it with help of + or - keys. This will change the boot sequence. For
example, you can select the boot sequence as the one shown below:
AwardBIOS Setup Utility
Main Advanced Power
Boot Exit
1. Removable Device [Legacy Floppy] Boot Sequence:
2. ATAPI CD-ROM [None]
3. IDE Hard Drive [IBM-DTLA-307020] <Enter> to select the de-
4. Other Boot Drive [Disabled] vice To select the boot se-
quence, use up or down Ar-
Plug & Play O/S [No] row.
Boot Virus Detection [Enabled]
Quick Power On Self Test [Enabled] Press <+> to move the
Boot up Floppy Seek [Enabled] Device up the list, or
Full Screen Logo [Enabled] <-> to move it down
the list
F1 Help ↓ Select Item -/+ Change Values F5 Setup Defaults
Esc Exit ←→ Select Menu Enter Select Sub-Menu F10 Save and Exit
After setting the specified parameters, use the Left or Right keys to select the
Exit menu item. Reply positively to the prompt on saving the specified
parameters.
For AwardBIOS for motherboards for Pentium, Pentium Pro processors (i.e the ones
older than those described above) and AMD-K5/K6, the standard CMOS setup
screen looks like this: