8.0
Table Of Contents
- Introduction
- Installation and operation
- General program information
- Creating a partition (disk) image
- Restoring a disk (partition) from an image
- Selecting an image to restore from
- Checking image integrity before restoration
- Selecting a partition to restore
- Selecting a location to restore to
- Selecting partition type
- Selecting a file system
- Selecting restored partition size
- Assigning a letter to a partition
- Checking file system integrity
- Restoring several partitions at once
- Restoration script
- Browsing and restoring individual files
- Transferring the system to a new disk
- Adding a new hard disk
- Scheduled tasks
- Other operations
- Troubleshooting
Browsing and restoring individual files
Copyright © Acronis, Inc., 2000–2004
37
If the selected image file is not protected by a password, you will immediately see
the image comment along with the list of stored partitions. If the file is protected by
a password, you will see only the comment.
Selecting partitions to connect and letter assignment
You must select a partition to connect as a virtual disk. Note that you can’t connect
the entire disk.
Select partition to connect
You can also select a letter to be assigned to the connected disk (from the Partition
letter drop-down list.)
In the next window, you will see a disk-connection script containing a single operation.
Click Proceed to connect the image as a virtual disk.
After the disk is connected, the program will run Windows Explorer showing its
contents.
Now you can easily copy any file (or folder) from the virtual disk to the real one
using Windows Explorer or a similar file manager.
6.2 Unplugging a virtual disk
We recommend that you unplug a virtual disk after all necessary files and folders
are copied. However, the virtual disk will disappear after your PC is turned off.
To disconnect the virtual disk, select Unplug.
You can also unplug the disk by clicking Unplug Image in the Acronis True Image
main window.