8.0
Table Of Contents
- Introduction
- Installation and operation
- General program information
- Creating a partition (disk) image
- Restoring a disk (partition) from an image
- Selecting an image to restore from
- Checking image integrity before restoration
- Selecting a partition to restore
- Selecting a location to restore to
- Selecting partition type
- Selecting a file system
- Selecting restored partition size
- Assigning a letter to a partition
- Checking file system integrity
- Restoring several partitions at once
- Restoration script
- Browsing and restoring individual files
- Transferring the system to a new disk
- Adding a new hard disk
- Scheduled tasks
- Other operations
- Troubleshooting
Appendix B Hard disks and BIOS setup
76
Copyright © Acronis, Inc., 2000–2004
Place the marker on the Primary Master line and press the Enter key to get to the
screen that looks like this:
AwardBIOS Setup Utility
Main
Primary Master [Auto] Item Specific Help:
Type [Auto] <Enter> to select the type
of the IDE drive.
[User Type HDD] allows
you to set each entry on
your own.
Warning: Ultra DMA Mode
3/4/5 can be enabled only
when BIOS detects
Shielded 80-pin cable.
F1 Help ↓ Select Item -/+ Change Values F5 Setup Defaults
Esc Exit ←→ Select Menu Enter Select Sub-Menu F10 Save and Exit
Place the marker on the value of the Type parameter ([Auto] in this case) and press
the Enter key to open the list of possible values of this parameter; for example:
None
Auto
User Type HDD
CD-ROM
LS-120
ZIP-100
MO
Other ATAPI Device