Operation Manual

 You can click Send test e-mail message to check if the Disaster Recovery Plan is sent correctly

with the specified settings.

Select Upload disaster recovery plans to the following location check box if you would like to keep

the DRP copy and Browse the location.

7.5.6 Notifications

1) E-mail notifications

This option sets up e-mail notifications about the basic events during your backup task, such as

successful completion, backup failure or need for user interaction. The default setting for this option

is Disabled.

Select the Send e-mail notifications check box to enable notifications.

Under Send e-mail notifications check box select the desired settings as follows:

 When backup completes successfully – to send a notification when the backup task has

completed successfully.

 When backup fails – to send a notification when the backup task has failed.

 Add full log to the notification – to receive the full log.

Type one or several e-mail addresses where notifications will be sent. Addresses are entered in the E-

mail addresses field separated by semicolons.

Indicate the desired Subject for your notification messages.

SMTP server – enter the name of the outgoing mail SMTP server.

Port – set the port of the SMTP server (the default port value is set to 25).

User name – enter your username.

Password – enter your password.

From – type the e-mail address of the user from whom the message will be sent. If you leave this

field empty, messages will be sent as if they are from the destination address.

Use encryption – you can opt for the encrypted connection to the mail server and choose SSL or TLS

encryption types.

Click Send test e-mail message to make sure all your settings are correct.

2) SNMP notifications

This option defines whether the agent(s) operating on the managed machine have to send the logs of

the backup operation events to the specified Simple Network Management Protocol (SNMP)

managers. You can choose the types of events to be sent. The default setting for this option is:

Disabled.

Select whether to send the backup operation events log messages to machines running SNMP

management applications, please, choose one of the following:

 Do not send SNMP notifications – to disable sending the events log of the backup operations to

SNMP managers.