Operation Manual

Where “Original_VM_name” is the original name of the mounted virtual machine and “_mount” is

the postfix you can change. For example, if the mounted VM had the “VM_original” name then after

mounting it will be named “VM_original_mount”.

After you selected where the VM(s) will be run, click Next to finish the second step and proceed to

the last one.

11.3 Additional Settings

In the third step of the wizard you can select the check boxes for the Power on the mounted VM and

Connect to network options.

Run VM from Backup wizard, Step 3 “Additional Settings”

Select the Power on the mounted VM option to automatically run your machine upon completion of

the wizard. Note that the mounted machine's replica (e.g. the original machine) might appear on the

network. Theerefore, for safe operation, it’s advisable to power on the mounted virtual machine

manually after taking the necessary precautions.

Select the Connect to network check box when mounting a failed VM which is no longer present in

the network. If you are mounting a VM for testing purposes (to ensure some data consistency inside)

while the original VM is currently running, keep this check box cleared. Before you power on a VM,

you should manually change the VM network configuration settings to disconnect it from the