User's Manual

3. Select a partition to mount as a virtual disk. (Note that you cannot mount an image of the entire

disk except in the case when the disk consists of one partition). If the image contains several

partitions, by default all of them will be selected for mounting with automatically assigned drive

letters. If you would like to assign different drive letters to the partitions to be mounted, click

Options.

You can also select a letter to be assigned to the virtual disk from the Mount letter drop-down

list. If you do not want to mount a partition, select Do not mount in the list or unselect the

partition's checkbox.

4. If you select the Mount the partitions in the read-write mode box, the program assumes that the

mounted image will be modified and creates an incremental archive file to capture the changes.