OPERATIONAL MANUAL Operation Manual Xymba Automated Disc Publisher Model #: XB43/53 Series (PC-Connected) Serial Number: ______________________________ (The serial number is labeled on the rear panel of the device.
Operation Manual, Xymba XB43/53 Version V1.2 (This page is intentionally left blank.) 2 © 2008, Acronova Technology, Inc.
Version V1.2 Operation Manual, Xymba XB43/53 PREFACE Important Safety Instructions For your safety, basic precautions should always be followed to reduce risk of damage, electric shock, fire, and personal injury. This includes the following: Read this manual carefully and follow all warnings and instructions. Operate the unit with only the proper electrical specifications as labeled on the device.
Operation Manual, Xymba XB43/53 Version V1.2 brands, and trademarks are the property of their respective owners. FCC Compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures.
Version V1.2 Operation Manual, Xymba XB43/53 This warranty will not cover abuse, misuse, alteration, modification, tampering, negligence, faulty installation, accidents, lack of reasonable care, unauthorized repairs or service, or if installed to any device not provided with the product, or if the serial number label provided with this product has been broken or removed. This warranty does not cover damages that occur in shipment, due to acts of God.
Operation Manual, Xymba XB43/53 Version V1.2 (This page is intentionally left blank.) 6 © 2008, Acronova Technology, Inc.
Version V1.2 Operation Manual, Xymba XB43/53 TABLE OF CONTENTS Preface 3 Table of Contents 7 Specifications 8 Unpacking Your Xymba 9 Package Contents......................................................................... 9 Getting Familiar with Xymba 11 Block Diagram..............................................................................11 A Look at Xymba..........................................................................11 Finish Disc Bin or Output Ramp .....................................
Operation Manual, Xymba XB43/53 Version V1.
Version V1.2 Operation Manual, Xymba XB43/53 UNPACKING YOUR XYMBA Congratulations on purchasing the Xymba XB43/53 Automated Disc Publisher (PC-Connected). Your Xymba automated optical disc publisher is a state-of-the-art integrated system, with a built-in dual optical disc recorders, USB 2.0 interface and autoloaders, which requires a PC and software to operate. Xymba has an 80 disc capacity and a lockable cabinet that protects discs from dust and unauthorized access.
Operation Manual, Xymba XB43/53 Version V1.2 warranty. Once you have removed all the parts included with your package, please check to see if any pieces are missing or damaged. If any part is missing or damaged, contact your local dealer immediately. The items listed below should be included in the package: One Xymba XB43/53 Automated Disc Publisher One power cord One USB cord One installation disc (includes device driver) One operation manual 10 © 2008, Acronova Technology, Inc.
Version V1.2 Operation Manual, Xymba XB43/53 GETTING FAMILIAR WITH XYMBA Block Diagram Xymba XB43/53 is an integrated system with two built-in optical disc drives, and auto-loaders. See the illustration below.
Operation Manual, Xymba XB43/53 Version V1.2 unlock and lift to open. The lock also secures the Finish Disc Bin. Reject Disc Tray The Reject Disc Tray, with a 3 disc capacity, receives the rejected discs. Pull down to open. Reject Disc Slot The slot where rejected discs will be discarded when the reject tray is in its closed position. Finish Disc Bin or Output Ramp Depending on the configuration of your device during purchase it may come with a Finish Disc Bin or Output Ramp.
Version V1.2 Operation Manual, Xymba XB43/53 Ventilation This allows heat to escape. Do not block this otherwise the unit may overheat. LED Indicators Xymba’s status is reflected by the LED indicators. When turned on, it will enter initialization indicated by a flashing green ready light. When initialization is complete, the ready light will change to steady green. The table below describes the meanings of the LED indicators.
Operation Manual, Xymba XB43/53 Version V1.2 HARDWARE INSTALLATION Finding a Place for Xymba Xymba should be placed on a fairly level surface, firm enough to support the unit and discs. Always allow ample workspace for your operation, with easy access to the blank and finished discs. Do not expose the unit to direct sunlight or high humidity, as it may cause the unit to malfunction.
Version V1.2 Operation Manual, Xymba XB43/53 SOFTWARE INSTALLATION Xymba requires a device driver to be installed before it can work properly with the application software. Before starting the application software installation, the device driver must be installed. System Requirements Microsoft® Windows XP, Vista Pentium III 700Mhz (Pentium IV 1.
Operation Manual, Xymba XB43/53 Version V1.2 (This page is intentionally left blank.) 16 © 2008, Acronova Technology, Inc.
Version V1.2 Operation Manual, Xymba XB43/53 BEFORE GETTING STARTED Tips for Handling Optical Discs Never touch the printable or data surface of the disc, as it may decrease quality and disc lifespan. Refer to the arrows on the illustration to the right, Always handle discs from the outer edge or the center hole. What You Need to Start a Disc Publishing Session The Xymba XB43/53 is a PC-connected publisher, which requires a USB connection to a host computer.
Operation Manual, Xymba XB43/53 Version V1.2 LightScribe Labeling Operation If you have purchased the LightScribe-enabled version of Xymba, you may automatically label a stack of LightScribe discs. Follow the steps below to start a LightScribe labeling session: 1) Place a stack of LightScribe discs label side down in the disc loader. Make sure that the LightScribe label side is facing downward.
Version V1.2 Operation Manual, Xymba XB43/53 (This page is intentionally left blank.) © 2008, Acronova Technology, Inc.
Operation Manual, Xymba XB43/53 Version V1.2 APPENDIX Xymba Maintenance Periodically cleaning the device will ensure proper performance. Follow the steps below to maintain Xymba: 1) 2) 3) 4) 5) 6) Turn the power switch to the Off position. Remove the master and blank discs. Unplug the power cord from the wall outlet. Unplug the USB cord from the host computer. Clean the Xymba unit using a lint-free cloth moistened with warm water. Dry the unit immediately with a dry lint-free cloth.
Version V1.2 Operation Manual, Xymba XB43/53 Writing Speed The recorder will automatically adjust the writing speed according to the disc quality. The system will monitor and automatically adjust the writing speed as the optical laser moves from the inner ring to the outer ring, up to the selected speed. The recorder’s maximum speed may never be reached if a lower grade disc is used. At the maximum speed, for a single recorder, duplicating a 4.7 GB DVD should not take more than 8 minutes.
Operation Manual, Xymba XB43/53 Version V1.2 FREQUENTLY ASKED QUESTIONS Why is my duplication failure rate so high? Try a lower writing speed using the software. Use a different brand of blank discs. Check the power source. Why do my discs get stuck in the disc loader during the duplication process? Check to see if the disc is the standard size (120mm). Make sure discs are level in the loader. Reduce the quantity of discs per load. Some discs may bend from the weight of the discs placed on top of them.
Version V1.2 Operation Manual, Xymba XB43/53 (This page is intentionally left blank.) © 2008, Acronova Technology, Inc.
Operation Manual, Xymba XB43/53 Version V1.2 Acronova Technology, Inc. http://www.acronova.com Manual Ver.: 1.2, January 2009 Part #: 711-XB43-9AC6-2 24 © 2008, Acronova Technology, Inc.