Owner manual

ATR9800 User Guide
36 Bells
Bells
Bell schedules allow for clocks to generate predefined audible signals. The bell module allows for
an unlimited number of bell schedules. A signal can be generated for every minute of the day.
For Bells to work correctly:
♦ The bell schedule number must be assigned to a clock under clock maintenance.
♦ The Acroprint relay kit must be attached to the clock and the switch in use set to bell.
♦ The bell schedule must be programmed into the clock.
To add a bell schedule, click the Add icon (1). Enter a number for this schedule. Enter a
description for this schedule. Click the Add Schedule icon (2) to add a signal time to the
schedule. Bell times are entered by:
Time: The time the signal is to sound.
Duration: The length of the signal.
Sun-Sat: The day of the week the signal is to sound.