Owner's manual

ManualsBrandsAcroprint ManualsRelayATRx Secure PunchIn

ATRx Secure PunchIn™

BIOMETRIC FINGERPRINT TECHNOLOGY

INSTALLATION GUIDE

Attendance Rx™ software

ATRx Secure PunchIn™ fingerprint reader (FIU)

Installation guide

Thank you for purchasing ATRx Secure PunchIn. This installation

guide will help you learn how to connect the fingerprint reader,

enable biometrics in the software and enroll employee fingerprints

in the system.

1. Ensure your computer meets the minimum

system requirements. See the product box

or visit the Acroprint website at

www.acroprint.com.

2. Verify package contents:

1. Plug the fingerprint reader cable into an available

USB port on the PC. The location of the USB port

will depend on the configuration of your computer.

ATRx Secure PunchIn™ Installation Guide - 2

Install Attendance Rx software by inserting the software CD into the

CD-ROM Drive. Follow and complete the Setup Wizard which will ask

you to input your Pay Period information, Shift and Lunch rules and a

new password. At completion of the Setup Wizard enter at least one

employee and then close the administrator screen.

NOTE: Leave the CD in the CD-ROM drive until the hardware

has been installed.

Software Installation:

Connect ATRx Secure PunchIn

fingerprint reader to Windows Based PC:

Before You Start:

Summary of content (4 pages)

PAGE 1
ATRx Secure PunchIn™ BIOMETRIC FINGERPRINT TECHNOLOGY Thank you for purchasing ATRx Secure PunchIn. This installation guide will help you learn how to connect the fingerprint reader, enable biometrics in the software and enroll employee fingerprints in the system. Before You Start: 1. Ensure your computer meets the minimum system requirements. See the product box or visit the Acroprint website at www.acroprint.com. 2.
PAGE 2
The computer should display a message indicating that the new hardware was found. When the ‘Found New Hardware Wizard’ is displayed: 1. If the Wizard asks “Can Windows connect to Windows Update to search for Software?”, select “No, not this time”. 2. Verify that the Attendance Rx CD is still in the CD-ROM drive. If NOT, then load it, and when the InstallShield Wizard starts to run select “Cancel”. 3. Respond to the Wizard questions by accepting the default answers to the questions. 4.
PAGE 3
Enrolling an Employee in the Software Troubleshooting To enroll an employee’s fingerprint: 1. Make sure Attendance Rx software is running 1. Right click the System Tray Icon. In order for you to enable Biometrics functionality and enroll employees the Attendance Rx software must be running. 2. Select “Run Administrator”. 3. Go to the Employee screen in the Administrator by clicking “Employees” on the left side of the Administrator.
PAGE 4
A. Navigate to the Control Panel and find the Add/Remove Hardware icon. B. Double click Add/Remove Hardware. C. The Add/Remove Hardware display will appear. D. Click Next to begin the wizard. E. Select Add/Troubleshoot a device. F. Click Next. Additional Questions Please contact Acroprint’s Technical Support Department. OnLine www.acroprint.com 1-800-334-7190 Go to the Acroprint website to find answers to Frequently Asked Questions (FAQS). Simply click on the support button on the left menu.