Manual

Typehead
Assembly
Cover
Lower
Housing
INTRODUCTION
We thank you for purchasing an
Acroprint Heavy Duty Document
Control Stamp. Packaged with your
machine are:
• two (2) Keys.
• one (1) User’s Manual and the
Warranty Card.
Please complete the warranty card
and return the tear-off portion to the
factory as soon as possible. The model
and serial numbers are displayed
on the label located on the back of
the machine. The serial number is
a seven digit number followed by
two alphabetic characters (example:
1234567AH).
We suggest you record the above
information in the information
reference section on the back page,
making sure to list your key number.
Before operating your Acroprint Heavy
Duty Document Control Stamp, please
read these instructions completely. For
optimum performance, do not plug
stamp into an electrical circuit with
other office machines or applianc-
es. Caution should be used when
stamping forms with paper clips or
staples attached. Serious damage
to the print mechanism and/or
the electronic circuit could result.
Service should be limited to qualified
technicians only.
FIGURE 2
FIGURE 1
Lock
Levers
FIGURE 8
FIGURE 8
FIGURE 9
To Remove Slack
Apply pressure
Ribbon
Drive Shaft
Depress to
Raise
Ribbon
Feeler
Ribbon
Tension
Spring