Owner manual

HandPunch 3000/4000 Manual
51
Programming the HandPunch
The HandPunch is programmed via a series of command menus. A summary
of the menus and commands is given in Table 6.
Table 6: Basic Command Mode Structure
Service Menu Setup Menu Management
Menu
Enrollment Menu Security Menu
Password 1 Password 2 Password 3 Password 4 Password 5
Calibrate Set Language Supervisor
Override
Add Employee Special Enroll
Status Display Set Date Format List Users Add Supervisor
Set Time and
Date
Set User Data Remove User
Set Address Restrictions
Set ID Length
Set Serial
Set Reader Mode
Upgrade
To control access to the command menus, each menu has a unique password.
This password is requested as a part of the process for accessing each menu.
A supervisor must enter the correct password for that menu to access that
menu. The default menu passwords are given in Table 6.
To increase the security of the HandPunch, Schlage Biometrics recommends
changing the passwords for the command menus to new numbers. These
password numbers can be up to 10 digits long. This is done with the Set
Passwords command described on.
Authority Level
A second method for controlling access to the command menus is through
the use of Authority Levels. Authority Levels control whether or not a user has
access to the command menus.
• Level 0 is for a user who does not need access to any of the command
menus.
• Level 5 is assigned to Supervisors who need access to all of the command
menus.