Instruction Manual

17
4.2.4 Daily overtime after
The amount of time worked in a day, after which, overtime
will begin to accumulate. Note: Leave at the default setting,
24 hours if you pay overtime based on a weekly setting only
(i.e. 40 hours). Daily overtime may be set to 2 levels (i.e.
8:00 and 12:00). Click on time window to change time.
4.2.5 Weekly overtime after
The amount of time worked in a week, after which, overtime
will begin to accumulate. Note: Weekly overtime does not
apply to semimonthly or monthly pay periods. Weekly
overtime may be set to 2 levels (i.e. 40:00 and 48:00). Click
on time window to change time.
4.2.6 7th Day Overtime
When this feature is enabled, all hours worked on the
seventh consecutive worked day will be promoted to the
next highest pay level provided that the seven consecutive
days start at the beginning of the first or second week of the
weekly or biweekly pay period. This feature does not affect
weekly overtime calculations and will not override weekly
overtime thresholds. The default setting for this feature is
disabled.
4.2.7 Pay interval round
Increment of time used to calculate time worked totals as if
the punch occurred at the interval division selected.
Selecting 1 minute calculates employee time on a minute to
minute basis. Options include 1, 5, 6, 10 or 15 minute
increments.
4.2.8 Click on “More...” button for second screen in setup.
Setup