User Manual
Table Of Contents
- 1. System Introduction
- 2. Assembly/Disassembly Procedures
- 3. BIOS Settings
- 4. Function Description
- 5. Driver and Utility Installation
- 6. Software Installation and Programming Guide
- 7. FAQ
- Q 1. Why the Linux operating system can not re-install by the same storage device?
- Q 2. Why the monitor display abnormally on screen during Linux installation?
- Q 3. Why the display resolution only for 800x600 and 1024x768 at X Window under Basic Graphics Mode?
- Q 4. Does my system support Windows 8?
- Q 5. Why do we get error message when we execute utility program?
- Q 6. What can I do if my system does not power on?
- Q 7. No display when power on?
- Q 8. Where is the serial number located on my system?
- Q 9. My system has audio problem?
- Q 10. My system can not connect to Internet?
AES-HM76Z1FL User Manual
21
www.acrosser.com
Note: The Day option automatically changes when you set the Date option.
• System Time
This option allows user to set the time on the RTC. Use your keyboard to navigate to
the hour, minute, or second and type in the correct numeric value.
Note: The time is in 24-hour format. For example, 5:30 A.M. appears as 05:30:00, and 5:30
P.M. as 17:30:00.
• Access Level
This feature enables user to provide access to the user based on the administration
rights, whether the user can be an Administrator or Guest User.
3.3. Advanced Setup
Select the Advanced menu item from the Aptio Setup Utility to enter the Advanced
BIOS Setup screen. You can select any item in the left frame of the screen and press
<Enter> key to enter its sub-menu and access its parameters.
Aptio Setup Utility - Copyright © 2012 American Megatrends, Inc.
Version 2.15.1226. Copyright © 2012 American Megatrends, Inc.
→← : Select Screen
↑↓ : Select Item
Enter : Select
+/- : Change Opt.
F1 : General Help
F2 : Previous Values
F3 : Optimized Defaults
F4 : Save & Exit
ESC : Exit
SATA Configuration
F81216 Second Super IO Configuration
W83627DHG Super IO Configuration
W83627DHG HW Monitor
STAT Device Options Settings
Main BootChipsetAdvanced Security Save & Exit