User Manual
Table Of Contents
- 1. System Introduction
- 2. Assembly/Disassembly Procedures
- 3. BIOS Settings
- 4. Function Description
- 5. Driver and Utility Installation
- 6. Software Installation and Programming Guide
- 7. FAQ
- Q 1. Why the Linux operating system can not re-install by the same storage device?
- Q 2. Why the monitor display abnormally on screen during Linux installation?
- Q 3. Why the display resolution only for 800x600 and 1024x768 at X Window under Basic Graphics Mode?
- Q 4. Does my system support Windows 8?
- Q 5. Why do we get error message when we execute utility program?
- Q 6. What can I do if my system does not power on?
- Q 7. No display when power on?
- Q 8. Where is the serial number located on my system?
- Q 9. My system has audio problem?
- Q 10. My system can not connect to Internet?
AES-HM76Z1FL User Manual
22
Acrosser Technology Co., Ltd.
3.3.1. SATA Configuration
This option allows you to view and congure the SATA settings.
Aptio Setup Utility - Copyright © 2012 American Megatrends, Inc.
Version 2.15.1226. Copyright © 2012 American Megatrends, Inc.
→← : Select Screen
↑↓ : Select Item
Enter : Select
+/- : Change Opt.
F1 : General Help
F2 : Previous Values
F3 : Optimized Defaults
F4 : Save & Exit
ESC : Exit
Main BootChipsetAdvanced
Enable or Disable SATA Device.SATA Controller(s)
SATA Mode Selection
Serial ATA Port 1
Software Preserve
Port 1
CF CARD
Software preserve
CF CARD
[Enabled]
[AHCI]
Empty
Unknown
[Enabled]
Empty
Unknown
[Enabled]
Security Save & Exit
• SATA Controller(s)
Set this opton to enable or disable the SATA devices.
• SATA Mode Selection
Determines the SATA controller(s) will operate in
IDE
or
AHCI
mode.
• Serial ATA Port 1
Enable or disable SATA Port 1.
• CF CARD
Enable or disable CF card socket.