User Manual
Table Of Contents
- 1. System Introduction
- 2. Assembly/Disassembly Procedures
- 3. BIOS Settings
- 4. Function Description
- 5. Driver and Utility Installation
- 6. Software Installation and Programming Guide
- 7. FAQ
- Q 1. Why the Linux operating system can not re-install by the same storage device?
- Q 2. Why the monitor display abnormally on screen during Linux installation?
- Q 3. Why the display resolution only for 800x600 and 1024x768 at X Window under Basic Graphics Mode?
- Q 4. Does my system support Windows 8?
- Q 5. Why do we get error message when we execute utility program?
- Q 6. What can I do if my system does not power on?
- Q 7. No display when power on?
- Q 8. Where is the serial number located on my system?
- Q 9. My system has audio problem?
- Q 10. My system can not connect to Internet?
AES-HM76Z1FL User Manual
26
Acrosser Technology Co., Ltd.
3.4.1. PCH-IO Configuration
Aptio Setup Utility - Copyright © 2012 American Megatrends, Inc.
Version 2.15.1226. Copyright © 2012 American Megatrends, Inc.
→← : Select Screen
↑↓ : Select Item
Enter : Select
+/- : Change Opt.
F1 : General Help
F2 : Previous Values
F3 : Optimized Defaults
F4 : Save & Exit
ESC : Exit
SB USB Configuration
xHCI Mode
EHCI1
EHCI2
Legacy USB Support
Main BootChipsetAdvanced
[Smart Auto]
[Enabled]
[Enabled]
[Enabled]
Security Save & Exit
• xHCI Mode
Options Description
Disabled / Auto / Smart Auto Mode of operation of xHCI controller.
• EHCI1, EHCI2
Options Description
Enable / Disable Control the USB EHCI (USB 2.0) functions. One EHCI controller
must always be enabled.
• Legacy USB Support
Options Description
Enabled Enables Legacy USB support.
Disabled Keep USB devices available only for EFI applications.
Auto Disables legacy support if no USB devices are connected.