User Manual
Table Of Contents
- 1. System Introduction
- 2. Assembly/Disassembly Procedures
- 3. BIOS Settings
- 4. Function Description
- 5. Driver and Utility Installation
- 6. Software Installation and Programming Guide
- 7. FAQ
- Q 1. Why the Linux operating system can not re-install by the same storage device?
- Q 2. Why the monitor display abnormally on screen during Linux installation?
- Q 3. Why the display resolution only for 800x600 and 1024x768 at X Window under Basic Graphics Mode?
- Q 4. Does my system support Windows 8?
- Q 5. Why do we get error message when we execute utility program?
- Q 6. What can I do if my system does not power on?
- Q 7. No display when power on?
- Q 8. Where is the serial number located on my system?
- Q 9. My system has audio problem?
- Q 10. My system can not connect to Internet?
AES-HM76Z1FL User Manual
30
Acrosser Technology Co., Ltd.
3.7. Save & Exit Setup
Aptio Setup Utility - Copyright © 2012 American Megatrends, Inc.
Version 2.15.1226. Copyright © 2012 American Megatrends, Inc.
→← : Select Screen
↑↓ : Select Item
Enter : Select
+/- : Change Opt.
F1 : General Help
F2 : Previous Values
F3 : Optimized Defaults
F4 : Save & Exit
ESC : Exit
Main BootChipsetAdvanced
Save Changes and Exit
Discard Changes and Exit
Discard Changes
Save Changes
Discard Changes
Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
PO: ADATA SX900
Security Save & Exit
• Save Changes and Exit
Exit system setup after saving the changes.
• Discard Changes and Exit
Exit system setup without saving any changes.
• Save Changes
Save changes done so far to any of the setup options.
• Discard Changes
Discard changes done so far to any of the setup options.
• Restore Defaults
Restore/Load default values for all the setup options.
• Save as User Defaults
Save the changes done so far as User Defaults.
• Restore User Defaults
Restore the User Defaults to all the setup options.