User Manual
Table Of Contents
- 1. System Introduction
- 2. Assembly/Disassembly Procedures
- 3. BIOS Settings
- 4. Function Description
- 5. Driver and Utility Installation
- 6. Software Installation and Programming Guide
- 7. FAQ
- Q 1. Why the Linux operating system can not re-install by the same storage device?
- Q 2. Why the monitor display abnormally on screen during Linux installation?
- Q 3. Why the display resolution only for 800x600 and 1024x768 at X Window under Basic Graphics Mode?
- Q 4. Does my system support Windows 8?
- Q 5. Why do we get error message when we execute utility program?
- Q 6. What can I do if my system does not power on?
- Q 7. No display when power on?
- Q 8. Where is the serial number located on my system?
- Q 9. My system has audio problem?
- Q 10. My system can not connect to Internet?
AES-HM76Z1FL User Manual
31
www.acrosser.com
4. Function Description
4.1. Digital Inputs
There are 8 digital inputs for general purpose input. You can read the status of any
input through the software API. You can dene their purpose for any digital input
function. Please refer to the “
Software Installation and Programming Guide
”
chapter for the detailed information on how to use the API.
The following diagrams state how to connect the digital inputs to the devices on the
system.
High: 2.5 ~ 3.3V
Low: 0 ~ 0.8V