Instruction Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Procedures of Assembly/Disassembly
- Chapter 3 Board Introduction
- Chapter 4 H/W Information
- Chapter 5 BIOS Settings
- SATA Configuration
- W83627DHG Super IO Configuration
- Serial Port Console Redirection
- Intel(R) 82576 Gigabit Dual Port Network Connection
- N/A
- Configure Gigabit Ethernet device parameters
- Intel(R) 82574L Gigabit Network Connection
- N/A
- Configure Gigabit Ethernet device parameters
- SATA Mode Selection
- Port 1
- Port 2
- CF card
- COM1 Configuration
- COM2 Configuration
- LAN by Pass Function
- Change Settings
- Serial Port
- Change Settings
- Device Mode
- Console Redirection
- Console Redirection Settings
- EMS
- EMS Settings
- Terminal Type
- Bits per second
- Data Bits
- Parity
- Stop Bits
- Flow Control
- NIC Configuration
- Blink LEDs (range 0-1
- Link Status
- NIC Configuration
- Blink LEDs (range 0-1
- Link Status
- SYS temperature
- CPU temperature
- CPU Fan Speed
- VCORE
- LAN1 ~ 8
- USB Configuration
- xHCI Mode
- EHCI1
- Setup Prompt Timeout
- Boot up NumLock State
- Boot Logo
- PXE Function
1.2. Packing List
Check if the following items are included in the package.
Model Name Part Lists QTY
ANR-IB75N1/A/B system
1
Quick manual
1
CD Utility
1
SATA cable
2
Console Cable(RJ45)
1
USA or Europe or Japan or UK power cord
1
Rack bracket
2
Screw for bracket (for Rack + HDD bracket)
1
Power cord hook
1
ANR-IB75N1/A/B
Box Packing
1
1.3. Features
Supports LGA1155 Intel® Core™ i7/i5/i3 processor / Pentium CPU
Intel B75 Chipset
DDRIII DIMM x 2, up to 16GB memory
Intel 82574L 10/100/1000Mbps x 8
Two pairs LAN ports support bypass feature (LAN 1/2 + LAN 3/4)
LAN bypass can be controlled by BIOS and Jumper
CF socket, 2.5” HDD x 2, SATA II interface x 1, SATA III interface x 1
Console, VGA (pinhead), USB 3.0 x 2 (connectors)
Support boot from LAN, console redirection
8