AR-B104D Quick Manual AR-B104D Quick Manual V1.01 1. Mainboard illustration (Top Side) JP1 CAN Bus terminal resister select pin header. J1 PCI BUS connector (PC-104 Plus) CN2 CAN Bus connector JP3 Operation mode selection. JP2 Clear SRAM pin header. CN3 GPIO connector. JP8 SRAM mode select.
AR-B104D Quick Manual 2. Connector and Jumper Setting Table 1. JP1 2. CN2 Pin Description close 120 ohm 3. JP2 Pin Description Pin Description 1 CAN High 1-2 Normal 2 CAN Low 2-3 Clear SRAM resister. open None. 4. CN4 PIN define PIN define PIN define PIN define PIN define PIN define PIN define PIN define A1 GND B1 SIRQ A16 AD21 B16 AD20 C1 +5V D1 AD00 C16 GND D16 AD19 A2 VIO B2 AD02 A17 3.3V B17 AD23 C2 AD01 D2 +5V C17 AD22 D17 +3.
AR-B104D Quick Manual 5. JP3 Pin Description 1-2,3-4 open Mode 3 1-2 open,3-4 short Mode 2 1-2 short,3-4 open Mode 1 1-2,3-4 short Mode 0 Note: The JP3 default setting is Mode0.
AR-B104D Quick Manual 6.
AR-B104D Quick Manual 3. AR-B104D digital I/O, SRAM disk & CAN bus Module AR-B104D is a PCI-104 super I/O module which equipped with CAN bus, SRAM disk and digital I/Os on a single module. Features 1x 2KV isolated CAN bus. Support 2.0A and 2.0B protocol. Time stamp of CAN message 1MB battery backup SRAM disk. Supports disk and memory modes. 12x optical isolated digital inputs. Support counter mode. 12x 500 mA current sink digital outputs. Support pulse generator mode.
AR-B104D Quick Manual B. 9. Counter 1. 2. 3. 4. i. Logic High: 3V to 28V ii. Logic Low: 0V to 1.5V Maximum input frequency 10KHz( duty = 50% ). All digital input support counter mode 12 x independent 16-bit counters Connect to all digital inputs Operation Mode: a. Count to number interrupt. b. c. d. Digital Output 1. 2. 3. 4.
AR-B104D Quick Manual 6. API library for user development 7. CAN bus device status query 8. Device driver for Windows 2000/XP/XPe and Linux Maximum card Maximum 2 cards can be stacked up in one system Software 1. Windows XP, XPe and Linux device driver and API 2. Windows XP, XPe and Linux demo program 3. User interface for DIO, SRAM and CAN bus in Linux and Windows XP embedded Mechanical Dimension 90.17 x 95.89mm (3.55”x3.775”) Operating Temp. -20oC to 70oC (-1~158oF) without air flow Storage Temp.
