Owner's manual

ManualsBrandsAcrosser ManualsComputer AccessoriesAR-B5230

AR-B5230 SERIES Quick Manual

A. Main Chip

CPU

Pentium M / Celeron M

North Bridge

Intel 915GME/910GMLE

South Bridge

Intel ICH6M

LAN2

82541PI

LAN1

82562EZ

Page1/10

AR-B5230 Series Mamual Part NO:220010347-G

Summary of content (10 pages)

PAGE 1
AR-B5230 SERIES Quick Manual A.
PAGE 2
B.
PAGE 3
SODIMM DDR2 SO-DIMM CF SLOT CF CARD Page3/10 AR-B5230 Series Mamual Part NO:220010347-G
PAGE 4
C. Jumpers and Header 1.J5 SATA POWER 2.CN5 5V_SUS/PS_ON/GND FOR ATX 3.CN4 12V Power in connector 4.LVDS Connector for LVDS signals 5.JP2 Switch for select com2 RS232/422/485 6.CN3 Connector For Back Light Inverter 7.J2 Pin header for RS422/485 8.AUDIO MIC & Line-in & Line-out 9.JP5 Switch for select 3V or 5V Panel 10.FAN2 System Fan connector 11.J1 Pin header for speker& reset& power on 12.COM2 COM3 COM4 Serial Port COM2 & COM3 & COM4 13.FAN1 CPU Fan connector 14.
PAGE 5
1.J5 2.CN5 PIN SIGNAL 1 12V 2 GND 3 5V 4 5V 4.LVDS PIN SIGNAL PIN SIGNAL 2 GND 1 LCDVCC 4 NC 3 NC 6 NC 5 GND 8 GND 7 NC 10 NC 9 NC 12 NC 11 NC 14 NC 13 NC PIN SIGNAL 16 CLOCK+ 15 GND 1 GND 18 GND 17 CLOCK- 2 PS-ON 20 TX2- 19 TX2+ 3 5V-SUS 22 TX1- 21 NC PIN SIGNAL 1 12V 2 GND 3.CN4 Page5/10 5.
PAGE 6
.CN3 9.JP5 PIN SIGNAL PIN SIGNAL 1 12V 4 Back Light On 2 12V 5 GND 3 GND 6 Back Light Control 7.J2 PIN SETTING 1-2 5V 2-3 3.3V 10.FAN2 SIGNAL 1 TX+ PIN SIGNAL 2 TX- 1 GND 3 RX+ 2 12V 4 RX- 3 DATA 8.AUDIO1 11.
PAGE 7
12.COM2 &COM3 &COM4 15.JP6 STATUS PIN 13.FAN1 SIGNAL PIN SIGNAL 1 -DCD 2 -DSR 3 SIN 4 -RTS 5 SOUT 6 -CTS 7 -DTR 8 -RI 9 GND 10 GND PIN SIGNAL 1 GND 2 12V 3 DATA SETTING OPEN ENABLE SERIRQ CLOSE DISABLE SERIRQ 16.GPIO PIN SIGNAL PIN SIGNAL 1 GPIO0 2 5V 3 GPIO1 4 GPIO7 5 GPIO2 6 GPIO6 7 GPIO3 8 GPIO5 9 GND 10 GPIO4 14.JP7 STATUS Page7/10 SETTING OPEN 1.8V(BANINES) CLOSE 1.
PAGE 8
17.DVI1 PIN SIGNAL PIN SIGNAL 1 GND 2 TD0- 3 TD1+ 4 GND 5 TD2- 6 TCK+ 7 HPD 8 VCC 9 RED 10 GREEN 11 BLUE 12 VSYNC 13 HSYNC 14 TD0+ 15 GND 16 TD1- 17 TD2+ 18 GND- 19 TCK- 20 SCL1 21 SDA1 22 GND 23 GND 24 GND 25 SCL2 26 SDA2 18.JP8 & JP9 FSB 100MHz JP9 JP8 SETTING JP8 2-3 JP9 1-2 JP8 2-3 JP9 2-3 133MHz 19.
PAGE 9
24.USB2 20.JP4 STATUS SLAVE CLOSE MASTER 22.J3 SETTING OPEN LOCK CLOSE UNLOCK 23.
PAGE 10
ATX or AT POWER BUTTON Setting MODE ATX POWER BUTTON ATX SWITCH AT CLOSE or AT BIOS Setting ATX MODE Item Option Choice Advanced APIC MODE Enable Power ACPI Function Enable Power ACPI Supply Type S1 & S3 Power PWRON After PWR-FAIL Always Off Power POWER-Supply Type ATX AT MODE Page10/10 Item Option Select Advanced APIC MODE Enable Power ACPI Function Disable Power PWRON After PWR-FAIL Always Off Power POWER-Supply Type AT AR-B5230 Series Mamual Part NO:220010