Owner manual

5
Introducing the Motherboard
Table of Motherboard Components
This concludes Chapter 1. The next chapter explains how to install the motherboard.
LABEL COMPONENTS
1. DIMM1 240-pin DDR2 SDRAM slots
2. SYS_FAN System cooling fan connector
3. J1 Chassis intrusion detect header
4. LPT2 Onboard parallel port header
5. JP3 Select +5V/ +12V/RI/DCD jumper
6. ATX_POWER1 Standard 20-pin ATX power connector
7. J6~7 Select COM4 level jumper
8. J4~5 Select COM3 level jumper
9. COM3/4/5/6/8
Serial
p
ort connectors
10. JP2/6 Select +5V/ +12V/DCD jumper
11. CLR_CMOS1 Clear CMOS jumper
12. IDE1 Primary IDE connector
13. PANEL1 Front panel switch/LED header
14. CON_SATA1~2 Serial ATA connectors
15. DIO1 DIO header
16. PCI1 32-bit add-on card slot
17. J2 Select 24/18 bit panel
18. LVDS1~2 Low Voltage Differential Signaling Transmitter Interfaces
19. F_USB1 Front panel USB header
20. LVDSP1 LVDS inverter power connector
21. F_AUDIO1 Front panel audio header
22. LVDS_BLEN1 Select BACK LIGHT ENABLE of 24/18 bit panel
23. LVDS_VDDEN1 Select VDD ENABLE of 24/18 bit panel
24. LVDS_PWR1 Low Voltage Differential power select jumper
25. COM2 Serial port connector
26. JP1/4/5
Select +5V/ +12V/RI/DCD
j
um
p
e
r
27. COM7 Serial port connector
28. VGA2* VGA header
29. CN1 Keyboard/mouse header
VGA2 header and VGA port can not be used at the same time, you can
only use one of them.