Revision :1 AR-ES7230FL Installation Guide Revision 1.
Revision :1 Contents 1 2 Introduction to AR-ES7230FL……………………………………….. 3 1-1 Description……………………………………………………….… 3 1-2 Packing List………………………………………………………… 3 1-3 Main system………………………………………………………. 4 Procedure of Assembly/Disassembly……….……………………… 4 2-1 Installing the 2.5”Hard Disk Drive(HDD)..……………………... 5 2-2 Installing CF card……………...….………………………....…… 9 2-3 Installing SO-DIMM….……………………...……………....…… 10 2-4 Installing PCI card..….……………………...……………....
Revision :1 1. Introduction to AR-ES7230FL AR-ES7230FL is a system product mainly for ticket control, navigation, advertising, fleet managements applications. With fanless & dust-proof design, AR-ES7230FL can satisfy the user requirements in any application environment.
Revision :1 1.
Revision :1 2. Procedure of Assembly/Disassembly 2-1 Installing the 2.5” Hard Disk Drive (HDD) The following are step-by-step installation for 2.5”HDD device 1.
Revision :1 2. Lock HDD and Bracket together via screws (4pcs) 3.
Revision :1 4. Remove right side door screws (2pcs) out from the system bottom case 5. Route the HDD cable (for IDE HDD or SATA HDD) through the main board 6.
Revision :1 7. Lock HDD bracket to the top case by four screws 8. Insert the HDD wire-cable into the HDD module 9.
Revision :1 2-2 Installing CF card The following are step-by-step installation for CF card 1. Remove screws (2pcs) out from the bracket of CF card 2. Install CF card to the bracket 3. Insert the CF card to the CF card expansion slot 4.
Revision :1 2-3 Installing SO-DIMM The following are sep-by-step installation for SO-DIMM 1. Remove the HDD device out from the system 2. Install the SO-DIMM module into the SO-DIMM socket 3. Re-cover the HDD device 4.