User's Manual

AcroLAN Access Point User’s Guide

Version 2000.12.10

Page 17 of 17

Plug the Power Pack into a wall outlet or a power strip, and plug the connector into the

power receptacle on the back of the Access Point.

All three indicators on top of the access point will be bright green.

During normal operation, the indicators will be bright green. If the indicators does not

display a solid color or blink, see the “Top Panel Indicator Descriptions” in this manual.

Caution

If you have already installed Acrowave AcroLAN AWL-1100 series client card, you can

easily configure Access Point through air connection between your computer and

Access Point. You may skip next step and go to Access Point Management section.

STEP 3 Connect The Power Pack