User's Manual

!AcroLAN Card User’s Guide Version 20002.5

Page 11 of 38

Chapter 3 Installing the PC/PCI Card Adapter on a Windows OS

This section provides instructions for installing a PC/PCI adapter on a computer using

one of the Windows operating systems.

Whatever operating systems(Windows 95/98/ME/2000/XP) you use the installation

procedures are all same. But, PCI card does not support for Windows XP.

Caution

The following procedures and physical connections apply generally to normal

and conventional client adapter slots. In the cases of custom or non-conventional

equipment, be alert to possible differences in client adapter slot configurations.

3.1 Installing PC Card Adapter

Before you begin, examine the client adapter. One end is a dual-row, 68-pin client

adapter connector. This side will be inserted into the client adapter slot with the logo on

the client adapter facing up. The card is keyed so it can be inserted only one way into

the slot.

The client adapter can be connected to a client adapter Type II slot. This includes slots

that support both Type II and Type III cards.

Caution

Do not force the client adapter into the slot. Forcing it will damage both the

client adapter and the slot. If the client adapter does not go in easily, remove the card

and reinsert it.