2.4G Wireless Keyboard w/Nano Receiver USER'S GUIDE Ver.:1.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Functional Introduction Keyboard Buttons AAA battery X 2 Key Function 1. My Computer My Computer 2 Homepage(www/e) Start the default Web browser and loads the home Web page 3.
. Search 5. Volume down (Voice-) 6. Play/Pause 7. Mute 8. 9. 10 11 Search inside apps , albums, artists, or song Decrease the computer's sound volume. Switch between playing and pausing media Mute (turns off) the computer's sound Increase the computer's sound volume. Low Battery & Pairing Indicator Volume up (Voice+) LED Indicator Connect Button Battery Cover Setup the Connection between the Receiver and the Keyboard. 1. Insert the batteries into the Keyboard, then follow the steps below. 2.
6. When low battery, the battery indicator on the keyboard will start to blink. *Keyboard Indicator LED indicator LED is on for 10 sec. Power ON LED Blinks for 10 sec. Low Battery Warning LED Blinking Pairing (LED OFF when paired or failed after 10 sec.