User Manual

3
USB Port
Connect to the USB or Mouse
p
ort of
y
our com
p
uter
Installing the Charger and the Receiver
The receiver (charger) is connected to your computer via a cable. It needs to plug into your computer by a USB port or a mouse
port.
For USB port installation
Windows 98 (or higher) is required for USB port installation. Connect the receiver cable to the USB
port on the computer. For Windows, you may be prompted to insert the Windows software CD. Insert
the driver’s CD into the computer’s CD-ROM driver when ask to do so. Follow the instructions steps.
This RF Presenter Mouse is a plug-and-play device. Normally, it’s not necessary to setup the RF Channel. But if some
interference happens, then you must setup the connection RF Channel.
Setup the connection RF Channel between the Mouse and the Receiver
Receiver Presenter Mouse
Push the channel reset button on themouse. Push the channel reset button on thereceiver
If the cursor does not move after 30 seonds, please do the steps above.