User Manual

INSTALLING THE BATTERY AND REMOVING THE USB
TRANSCEIVER
1 Take the battery cover o.
2 Remove the USB transceiver.
3 Insert the included AA battery into the battery compartment. Make sure
that the + and - signs match the symbols in the compartment.
4 Replace the battery cover.
Tip: Store the USB transceiver in the mouse when it is not in use.
CONNECTING YOUR MOUSE TO YOUR COMPUTER
1 Plug the USB transceiver into a USB port on your computer.
2 Slide the ON/OFF switch on your mouse to ON.
The computer automatically detects the mouse and you can
immediately begin using it.
If the mouse does not work:
• Move your mouse closer to your computer.
• Re-plug the USB transceiver into the USB port on your computer, then
press the connect button on the mouse. The LED indicator on the
mouse ashes steadily while in pairing mode (10 seconds). After
pairing successfully, the LED indicator lights solid for 10 seconds,
then turns o.
• Check the battery in your mouse. The LED indicator blinks for
10 seconds when the battery is low.
Quick Setup Guide
|
NS-PNM6003-BK / NS-PNM6003-BK-C / NS-PNM6003-BU / NS-PNM6003-BU-C / NS-PNM6003-SV /
NS-PNM6003-SV-C / NS-PNM6003-RD / NS-PNM6003-RD-C / NS-PNM6003-WH / NS-PNM6003-WH-C
Wireless Optical Mouse
Before using your new product, please read these instructions to prevent any damage.
PACKAGE CONTENTS
• Wireless Optical Mouse
• USB transceiver
• AA battery (1)
• Quick Setup Guide
SYSTEM REQUIREMENTS
• Windows® 8.1, Windows® 8, Windows® 7, Windows Vista®, or
Mac OS 10.X or higher
• One available USB port
FEATURES
• Blue sensor for enhanced tracking
USB transceiver
Connect
button
ON/OFF
switch
Battery cover
Left button
Right
button
Scroll wheel
LED indicator
Final at size: 314.33 x 148.08 mm
Final fold size: 104.77 x 148.08 mm
Pull
AA battery
NS-PNM6003-BK_BK-C_BU_BU-C_SV_SV-C_RD_RD-C_15-0056_QSG_V1_EN.ai 1 2/3/2015 3:57:24 PMNS-PNM6003-BK_BK-C_BU_BU-C_SV_SV-C_RD_RD-C_15-0056_QSG_V1_EN.ai 1 2/3/2015 3:57:24 PM
V1
FINAL
FOR PRINT