2.4GHz Cordless Presenter with Laser Pointer USER'S GUIDE Ver.:1.00 Please DO NOT direct the laser beam at anyone’s eye.
Regulatory Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Certification This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
Installing the Batteries (Supplied) Push AAA battery X 2 *Sliding the battery cover off *Insert batteries to the correct polarities ˙Take off the screw. ˙Open the battery cover in the button of the Presenter and sliding the door off the presenter. ˙Insert the two supplied AAA batteries (included in the package) to the battery slots. Make sure the positive (+) and negative (-) ends of the batteries match the polarity markings inside the battery compartment. ˙Close the battery cover back into position.
Connecting the Presenter to the Computer USB Receiver ˙Plug the USB receiver dongle into an available USB port on your computer. Wait for the computer to go through its default process of recognizing the new hardware and installing the built-in native driver. You don’t need to do anything while your computer is going through the installation of a new device.
˙Pairing: Re-plug the RF receiver into the USB port of your computer. Turn on power switch. Then press the connect buttons on the presenter. If the presenter does not work after 30 seconds, Re-pairing again. (RF receiver has auto pairing function). ˙The LED indicator on receiver remains off afterwards when it is successfully paired with the presenter. ˙This will make the presenter and the receiver to connecting. This step can be repeated when needed.
Track Ball Track ball is functional like a mouse cursor. Next Page key to advance to the next slide. Previous Page key to return to the previous slide. Application Switch (Alt-Tab) key displays all the open windows and switches to the desired window by pausing over the selected window icon for 3 seconds. Dark Screen toggle key blackens the screen and resumes the presentation. Laser Pointer key triggers the laser beam. The laser beam emits for the duration that you press the key.
