2.4GHz Wireless Mouse USER'S GUIDE Model Name:MW8 Ver.:1.00 Please DO NOT direct the laser beam at anyone’s eye.
Mouse Buttons 1. Left button 2. Right button 3. Tilt Wheel 4. DPI switch 5. Forward 6. Backward 7. RF Receiver DPI Switch The brightness of LED indicator on the DPI switch indicates the DPI setting in use. There are three different settings: z Bright: 1600 DPI z Dim: 1200 DPI z No light: 800 DPI The default setting is 1600 DPI. You can easily switch between DPI settings. In order to save power, the LED display will only last for 10 seconds.
Installation Mouse: 1. Plug the RF receiver into the USB port of your Connect Button computer. 2. Put the batteries into the mouse and follow the Batteries installation. 3. The pairing only needs to be done when the mouse is not working when you install the mouse. 4. When the mouse is not working, you must pair It with the dongle. To do this, press the connect button on the dongle and the connect button Connect Button under the mouse. Power ON/OFF 5.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules.
