Specifications

ADT60/AET60 Reference Manual version 1.5 November 2005
8.1.4 RESET
This section describes the RESET command only for the case when no card type is selected or when the
card type 00
H
is selected. For all other cases, please refer to the specific section described for each
individual card type.
Command format
Instruction Code Data length
80
H
00
H
Response data format
ATR
ATR The answer-to-reset string returned by the card.
The return status code for this command is 90 00
H
when the inserted card is a T=0 card and 90 01
H
when
the inserted card is a T=1 card, otherwise the status code is 60 20
H
.
8.1.5 SET_NOTIFICATION
This command disables / enables the Card Status Messages transmitted by the reader to notify the host
computer of the insertion or removal of a card.
Command format
Instruction Code Data length Data
NOTIFY
06
H
01
H
NOTIFY Specifies whether the Card Status Message shall be transmitted to notify the host computer of
card insertion / removal
01
H
: transmit Card Status Message
02
H
: do not transmit Card Status Message
Response data format
No response data
 Advanced Card Systems Ltd. Page 18 of 25