Specifications

ADT60/AET60 Reference Manual version 1.5 November 2005
Appendix C: Technical Specifications
Device
BioCARDKey/BioSIMKey Fingerprint Scanner & Smart Card Reader/Writer
Power supply
Supply voltage....................................... Regulated 5V DC
Supply current ....................................... < 100mA (without smart card)
Universal Serial Bus Interface
Type....................................................... USB, four lines: +5V, GND, D+ and D-
Connector .............................................. supplied together with the reader
Speed .................................................... 1.5 Mbps
Fingerprint Scanner Interface
Power supply ......................................... USB powered
Power consumption .............................. Max 100 mA @ 5.5V
Active sensor size ................................. 12.8 x 18 mm
Array size .............................................. 256 x 360 pixels
Array pitch ............................................ 50 microns
Image resolution ................................... 508 DPI
ESD tolerant ......................................... +/- 15kV
Smart Card Interface
Standard ................................................ ISO 7816 1/2/3, T=0 and T=1
Supply current ....................................... max. 50mA
Smart card read / write speed ............... 9600 – 115200 bps
Short circuit protection .......................... +5V / GND on all pins
The presence of the smart card power supply voltage is indicated through a red LED on the reader
CLK frequency....................................... 4 MHz
Card connector ...................................... sliding contacts (8 contacts)
Card insertion cycles ............................. min. 100,000
Case
ADT60 BioSIMKey:
Dimensions............................................ 66.5mm (L) x 30mm (B) x 16mm (H)
AET60 BioCARDKey:
Dimensions............................................ 105mm (L) x 65mm (B) x 18mm (H)
Operating Conditions
Temperature .......................................... 0 - 40° C
Operation humidity ................................ 5% - 95%
Advanced Card Systems Ltd. Page 24 of 25