APG8202 PINhandy 2 One-time Password Generator User Manual info@acs.com.hk Subject to change without prior notice www.acs.com.
Table of Contents 1.0. Getting Started ........................................................................................................ 3 1.1. 1.2. 1.3. Device Description ................................................................................................................. 3 Supported Card Type ............................................................................................................ 3 Supported Language ...............................................................
1.0. Getting Started 1.1. Device Description The PINhandy Series is a family of dynamic password generators created to perform secure authentication in various applications. It is a portable and low-cost handheld smart card device that is capable of managing One Time Passwords, Challenge-response Authentication Codes, and Transaction Data Signing (PKI digital signatures) based on the security keys stored in the EMV cards.
2.0. APG8202 PINhandy 2 2.1. Device and Parts Figure 1 shows the different parts of the APG8202 PINhandy 2 and their descriptions. Figure 2 shows the string holder, which is located at the bottom left corner of the device. Card Slot (Contact Type Connector) LCD (2x16 Characters) Large Area for Logo Authentication Modes (L-R) 1. OTP 2. Challenge-response 3. Signature 4. TDS Function Keys: 1. Menu 2. Cancel (C) 3. Backspace (CL) 4. Confirm (OK) 5.
2.2. Function Keys The function keys of the APG8202 for the Normal Mode and the Calculator Mode are described in the table below. F1 F2 F3 F4 1 2 3 F5 4 5 6 F6 7 8 9 F7 .
3.0. Four Authentication Modes of PINhandy PINhandy has four authentication modes: Identify, Respond, Sign and Advanced Sign modes. During real transaction, cardholder selects the mode to be executed, which is usually instructed by the authentication form on the Internet. (e.g. ‘Insert your payment card and select the Identify mode on your personal card reader to log on to your bank account’) • Identify mode - This mode can be used where one-time passwords are required.
4.0. Frequently Asked Questions Q: How do I abort a transaction? A: You can always abort the transaction by pressing . Menu page will be displayed again. Q: What should I do if there is no response from PINhandy after card insertion? A: You can remove the card for a few seconds, and then re-insert it to the PINhandy. If it still does not work, check if the batteries are out of power.
5.0. Glossary • • • • • • • OTP – One-time Password CAP – Chip Authentication Program PLA – PIN-/Perso-less Authentication AA4C – Advanced Authentication for Chip DPA – Dynamic Passcode Authentication ATC – Application Transaction Counter M/Chip – MasterCard Chip Page 8 of 9 APG8202 PINhandy 2 User Manual Document Title Here Version 2.01 Document Title Here info@acs.com.hk www.acs.com.
6.0. Technical Support For any questions and inquiries regarding the product, please send an email to info@acs.com.hk Page 9 of 9 APG8202 PINhandy 2 User Manual Document Title Here Version 2.01 Document Title Here info@acs.com.hk www.acs.com.