User's Manual

BLN1-600A Chapter 2: Functional Description 22 of 116
Operator Control Panel Display
The operator control panel includes an 8 foot (2.4 m) cable and can be remote mounted (not
recommended) adjacent to the blender. The panel can be unplugged and removed if
necessary.
A programmable logic controller (PLC) controls the blender operation. This design provides
excellent blender performance along with an easily replaceable control panel in the unlikely
failure of any computer or electronic part.
The display menu format is very simple. After installation and setup, simply enter in the
recipe and start the blender. See the following pages for controller pushbutton & touchscreen
tags along with typical operator screens.
If it is desired to have a local display and control of the blender closer to a remote operator
station, an optional remote mount operator panel is available.
STARTUP SCREEN
The recipe screen will
automatically be shown
in 5 seconds. Touch
here to bypass startup
delay
Display & PLC
Software versions
shown. The first 2
digits should be the
same.