User's Manual

1400 Series Granulators Chapter 1: Safety 9 of 43
Mandatory Symbol
Description/Explanation
Read Operators Manual. This equipment must be operated and
maintained by properly trained personnel. The information
contained within this manual must be read and understood prior to
operating this equipment.
Lock Out. This equipment is operated with 3-phase electrical
power. Therefore, when performing any maintenance operations
we recommend following the local standards for performing a
lock-out/tag-out procedure.
Wear Safety Gloves. This equipment operates with sharp blades
and rotors. We recommend that technicians use safety gloves
while performing maintenance to protect hands from being
exposed to these sharp surfaces.
Wear ear and eye protection. This unit may produce loud and
continuous noise and may produce projectiles.
Pneumatic or hydraulic equipment. Pneumatic or hydraulic
equipment must be kept at a safe pressure.
Do not reach into unit. Reaching into a unit is prohibited while the
unit is in operation and may cause serious injury.