Operation Manual

Ceiling And Floor Installation Option
The unit is uniquely designed with the option to install either below the ceiling or mounted at low wall position
without any modification needed. Furthermore, the unit is design adds a touch of elegance to suit any interior
design requirement
Excellent Air Distribution
The louver with automatic air swing function fully optimize the room comfort by enables the air flow to be
evenly distributed into the room from the front discharge area.
Negative Ion Generator
ACSON emphasis on provide indoor air quality solution. Therefore, the negative ionizer technology is being
brought in as an essential part of the unit. The negative ion generator increases the amount of negative ion in
the air-conditioning area, creating a refreshing and healthy living environment.
Easy Installation
The ceiling convertible fan coil unit is easily installed with a very economical and space saving installation. No
need renovation on wall or ceiling for installation. This easy to install and ready to operate unit ensure rapid
and low installation cost.
Magnificent Serviceability
The blower, fan motor assembly and electrical parts can be inspected and air filter can be accessed by pulling
down the air intake grille. During servicing or repairing, only the bottom panel needs to be removed in order to
access the fan motor, blower, control box piping connection and drain pan.
Wireless Remote Controller
The standard unit comes with a simple, user friendly and stylish wireless controller. The G12 controller offers
many features:
• The compact LCD transmitter is able to operate the indoor unit within 9 meters of distance.
• Fan speed can be set at low/medium/high or automatic.
• Sleep mode auto control will gradually increase or decrease the set temperature to provide a comfort-
able surrounding for sleeping.
• The real time timer allows the unit to be switched ON and OFF automatically based on user settings.
• Ionizer or non-thermal plasma is available to create better air quality.
• Turbo mode function is available to enables the required set temperature to be achieved in a short time.
• Personalized Setting allows user to preset and store 2 groups of personal settings (including timer
setting) in the handset.
Auto Random Restart
Auto random restart function allows the unit to automatic restart as the last setting condition when the power
supply is resumed after power failure. However, the compressor will restart randomly if more than one unit is
installed and sharing the same phase of power.
Self Diagnosis
The microprocessor provides the possibility to detect and diagnose any fault or malfunction that occurs in the
system. The error will be reflected by the blinking of the LED lights.
6
3. FEATURES