User's Manual

SYSTEM DESCRIPTION AND INSTALLATION MANUAL
T
3
CAS/Part No.9005000
D. Gables ATC/TCAS Dual Mode S Transponder Control Panel
The Gables ATC/TCAS Mode S control panel is used to independently control two Mode
S transponders, and to interface with a Mode S installation with TCAS capabilities.
The control panel contains two isolated electronic modules each dedicated to a given
transponder. Each module derives its input ATC code data from two dual concentric
knobs. The selected code is then displayed on a four digit LCD, and subsequently
transmitted to each transponder.
Figure 1-11 shows a typical front panel layout of a Gables G7130 series control panel.
Table 1-18 gives items and specifications that are particular to these units.
Figure 1-11: Typical Gables ATC/TCAS Control Panel
Table 1-18: Gables G7130 Series Control Panel Leading Particulars
Item
Specification
Dimensions (maximum)
● Height 2.25 in. (57.2 mm)
● Width 5.75 in (146.1 mm)
●
Length
5.80 in. (147.3 mm)
Weight (maximum)
2.0 lb (0.907 kg)
Power Requirements:
● Primary +28 V dc, 0.25 A maximum current
● Display and Overlay Lighting 5 V, 400 Hz (2.3 A maximum)
Display Type
Four-Digit, Dichroic LCD
Pub. No. 8600200-001, Revision 004
34-45-29
1-65
04 Nov 2014
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.